Re: [CAD_CAM_EDM_DRO] 230v power supply?

If there are 4 wires, or terminals on the primary side, you may have a
reconnectable 115/230 volt unit, in which case, just 'parallel' the
primaries for 15v input. If you have 3 wires or terminals on the primary,
you may have a 'tapped' primary which could be wired for 115 (between one
wire & common) or 230 (between the 'other' wire & common). If you only have
two wires or terminals on the pri, and it's a 230v unit, you can get
37.5Vac from the 75v output, and/or 60Vac from the 120v output... if you
put 115Vac on the primary. Sorry, that's the best I can do fer ya.

RayHex

----------

> From: luisguillermo98 <luisguillermo98@...>
>
> I have a tranformer that has output 75v to 120v and I am thinking to
> use it with gedcko but the input is 230v. I need to know how can I
> install a such device 230v if my voltage at home is 115v?
>
> Luis...