Re: [CAD_CAM_EDM_DRO] laser cutter

Fogassa,

I would expect that Mach2 could do most of it. It would take some special
commands to control the power level.

Once you get the information on the laser control, some of us could help you
out.

First get all the information that you can about the laser and how it is
controlled.

Bob Campbell

----- Original Message -----
From: "afogassa" <afogassa@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, August 04, 2003 2:31 PM
Subject: [CAD_CAM_EDM_DRO] laser cutter


> what software controller could be used for a laser cutter gantry?
> Does it need specific mode to control the laser pulse? or could I use
> just on/off like when switching the spindle on/off?
> thank's
> Fogassa.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>