Re: [CAD_CAM_EDM_DRO] Re: laser cutter
Posted by
sam sokolik
on 2003-08-05 04:25:09 UTC
We have a 1000 watt laser here at work. It has a fanuc control with some extra goodies. There is an extra control circuit that runs off the fanuc that get sent how fast the the servos are running and output a pulse that is proportional to it. so as the feed slows down the pulses are spread apart. this is the run to the laser. You set it up by telling this board how often you want the laser to turn on - say every .010 and then you tell it how long the laser is on say .003 ms. there is a formula we use so if we are running at 30 ipm and want 100% duty cycle of pulses it gives us the info we need. now as the speed of the linear/circular cut slows down the duty cycle goes down and less heat is put into the part. this is because the pulse width is staying the same but as the feedrate slows down there is more time between pulses.
I hope this makes sense.
sam
afogassa <afogassa@...> wrote:
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Gary Davison"
wrote:
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
[Non-text portions of this message have been removed]
I hope this makes sense.
sam
afogassa <afogassa@...> wrote:
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Gary Davison"
wrote:
>an
> Hello from new member.
>
> My question, where could a cutting laser be purchased to mount on
> exsisting cnc machine.Try http://www.emissiontechnologies.com/
>
>
>
> Gary Davison
> http://www.gldpages.com
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
[Non-text portions of this message have been removed]
Discussion Thread
afogassa
2003-08-04 14:31:34 UTC
laser cutter
Robert Campbell
2003-08-04 14:44:12 UTC
Re: [CAD_CAM_EDM_DRO] laser cutter
Luc Juvens
2003-08-04 21:24:32 UTC
Re: [CAD_CAM_EDM_DRO] laser cutter
Gary Davison
2003-08-04 21:24:46 UTC
Re: laser cutter
Luke
2003-08-04 23:08:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: laser cutter
afogassa
2003-08-05 02:41:38 UTC
Re: laser cutter
sam sokolik
2003-08-05 04:25:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: laser cutter
Luke
2003-08-05 07:12:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: laser cutter
Bob Muse
2003-08-05 07:25:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: laser cutter