Re: [CAD_CAM_EDM_DRO] Re: DIY Three Axis DRO Kit
Posted by
Vince Negrete
on 2003-08-05 19:56:50 UTC
Yes, thats maybe another good idea. Make the "Serial Port?", that is used
to program the unit with Scott's firmware, have a dual purpose.
After programming, maybe have a jumper or DSW to output serial status data
to the port for EMC use???
Just tossing that out there but I haven't seen Scott's design yet.
Looks like this is going to really take off Scott!
Now if we can only get DIY Scales with 0.001" resolution for dirt cheap we
are set... :)
Vince
to program the unit with Scott's firmware, have a dual purpose.
After programming, maybe have a jumper or DSW to output serial status data
to the port for EMC use???
Just tossing that out there but I haven't seen Scott's design yet.
Looks like this is going to really take off Scott!
Now if we can only get DIY Scales with 0.001" resolution for dirt cheap we
are set... :)
Vince
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, ccq@x wrote:
>> I still got one question: Will it work with EMC/Linux?
>>
>> Bill
>
> Bill,
>
> The two best freeware programmers that will work with the DRO are:
>
> IC-Prog
> http://www.ic-prog.com/
> Supports Windows only but is the most easy to use.
>
> Pony-Prog
> http://www.lancos.com/prog.html
> Supports *both* Linux and Windows though I have not used it under
> Linux.
>
> The DRO has a "JDM"-type PIC programmer built into it.
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@... Moderator: pentam@... indigo_red@...
> [Moderators] URL to this group:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble. http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there,
> for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
Discussion Thread
sshumate
2003-07-31 13:32:40 UTC
DIY Three Axis DRO Kit
Bill Kichman
2003-07-31 16:52:19 UTC
Re: [CAD_CAM_EDM_DRO] DIY Three Axis DRO Kit
k8zre
2003-07-31 16:53:22 UTC
Re: DIY Three Axis DRO Kit
Patrick J
2003-07-31 17:32:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: DIY Three Axis DRO Kit
Denis Casserly
2003-07-31 17:42:22 UTC
Re: [CAD_CAM_EDM_DRO] DIY Three Axis DRO Kit
Kevin
2003-07-31 21:55:24 UTC
Re: [CAD_CAM_EDM_DRO] DIY Three Axis DRO Kit
dreamflyerbob2001
2003-07-31 22:06:57 UTC
Re: DIY Three Axis DRO Kit
Vince Negrete
2003-07-31 23:06:17 UTC
Re: [CAD_CAM_EDM_DRO] DIY Three Axis DRO Kit
Bob Muse
2003-08-01 04:35:53 UTC
Re: [CAD_CAM_EDM_DRO] DIY Three Axis DRO Kit
sshumate
2003-08-01 10:28:57 UTC
Re: DIY Three Axis DRO Kit
ccq@x...
2003-08-01 12:29:07 UTC
Re: [CAD_CAM_EDM_DRO] DIY Three Axis DRO Kit
Dan Mauch
2003-08-01 14:48:59 UTC
Triple stack Nema34 motors for sale.
boroko1
2003-08-01 23:43:45 UTC
Re: DIY Three Axis DRO Kit
questo999
2003-08-02 13:53:54 UTC
Re: DIY Three Axis DRO Kit
john_vreede
2003-08-04 02:11:18 UTC
Re: DIY Three Axis DRO Kit
John Guenther
2003-08-04 03:27:40 UTC
RE: [CAD_CAM_EDM_DRO] DIY Three Axis DRO Kit
Carlos Guillermo
2003-08-05 16:00:11 UTC
RE: [CAD_CAM_EDM_DRO] DIY Three Axis DRO Kit
ccq@x...
2003-08-05 17:40:00 UTC
Re: [CAD_CAM_EDM_DRO] DIY Three Axis DRO Kit
sshumate
2003-08-05 19:26:00 UTC
Re: DIY Three Axis DRO Kit
sshumate
2003-08-05 19:39:15 UTC
Re: DIY Three Axis DRO Kit
Vince Negrete
2003-08-05 19:56:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: DIY Three Axis DRO Kit
Antonius J.M. Groothuizen
2003-08-05 22:18:40 UTC
Re: DIY Three Axis DRO Kit
Terry D Palmer
2003-08-06 07:37:40 UTC
[CAD_CAM_EDM_DRO] Re: DIY Three Axis DRO Kit
wanliker@a...
2003-08-06 08:11:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: DIY Three Axis DRO Kit
oudimila
2013-06-29 12:07:38 UTC
Re: DIY Three Axis DRO Kit
jerryhu44
2013-06-30 08:22:11 UTC
Re: DIY Three Axis DRO Kit
Tom
2013-06-30 08:32:01 UTC
Re: DIY Three Axis DRO Kit [off topic]