Re: [CAD_CAM_EDM_DRO] Makino CNC mill
Posted by
Zafar Salam
on 2003-08-22 22:55:27 UTC
Thanks Jon and Bob on the feedback. You are right, it's a fairly big
machine, and servos would be the best choice. Now I'll have to do some maths
to get the proper motor size then search for the motors. Busy weekends ahead
:)
Zafar
and are fitted with hydraulic pulse motors. This is the first time I've
heared about these motors. Could anyone guide me where to find info on those
motors. If it's too much hassle to fix and operate those motors then these
can be replaced with steppers or servos.
machine, and servos would be the best choice. Now I'll have to do some maths
to get the proper motor size then search for the motors. Busy weekends ahead
:)
Zafar
>yard. It's controller and hydraulic unit are missing. Ball screws are there
> Zafar Salam wrote:
>
> >Hi everybody,
> >
> >Yesterday I spotted an old Makino CNC mill in the local machinery junk
and are fitted with hydraulic pulse motors. This is the first time I've
heared about these motors. Could anyone guide me where to find info on those
motors. If it's too much hassle to fix and operate those motors then these
can be replaced with steppers or servos.
> >motors.
> >
> You most definitely want to replace the hydraulic motors with servo
> I would assume this is a fairly large machine, so steppers would be a poor
> option.
>
> Jon
Discussion Thread
Zafar Salam
2003-08-21 22:16:52 UTC
Makino CNC mill
Bob Muse
2003-08-22 03:08:25 UTC
Re: [CAD_CAM_EDM_DRO] Makino CNC mill
Jon Elson
2003-08-22 09:52:25 UTC
Re: [CAD_CAM_EDM_DRO] Makino CNC mill
Zafar Salam
2003-08-22 22:55:27 UTC
Re: [CAD_CAM_EDM_DRO] Makino CNC mill