Re: CNC coil winder traverse
Posted by
ddgman2001
on 2003-08-28 13:48:56 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Carlos Guillermo">
Sheldon
> For a positioning system you could just take apart an old (or newFor that matter, what about an inkjet printer?
> $49) CD-ROM drive and use the optical head positioner to move
> around your wire guide - plenty of travel, high resolution, no
> backlash, etc. Of course, you would need position feedback, but
> for that you could mount a linear encoder strip to the moving head
> (low mass) and mount the read head to the chassis. Some of the
> older (and heavier) CD-ROM drives might be better, since they tend
> to have sturdier components, stronger motors, and the parts are
> bigger and easier to work with.
>
> Regards,
>
> Carlos Guillermo
> VERVE Engineering & Design
Sheldon
Discussion Thread
Graham Stabler
2003-08-27 04:49:39 UTC
CNC coil winder traverse
turbulatordude
2003-08-27 05:59:58 UTC
Re: CNC coil winder traverse
Graham Stabler
2003-08-27 06:42:53 UTC
Re: CNC coil winder traverse
Antonius J.M. Groothuizen
2003-08-27 06:54:39 UTC
Re: CNC coil winder traverse
Vajk Fekete
2003-08-27 07:05:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC coil winder traverse
Graham Stabler
2003-08-27 07:16:17 UTC
Re: CNC coil winder traverse
turbulatordude
2003-08-27 08:46:28 UTC
Re: CNC coil winder traverse
Jon Elson
2003-08-27 10:58:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC coil winder traverse
ddgman2001
2003-08-27 11:27:07 UTC
Re: CNC coil winder traverse
Alan Marconett KM6VV
2003-08-27 12:47:45 UTC
Re: [CAD_CAM_EDM_DRO] CNC coil winder traverse
Raymond Heckert
2003-08-27 22:53:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC coil winder traverse
Graham Stabler
2003-08-28 02:28:17 UTC
Re: CNC coil winder traverse
Carlos Guillermo
2003-08-28 11:37:20 UTC
RE: [CAD_CAM_EDM_DRO] Re: CNC coil winder traverse
ddgman2001
2003-08-28 13:48:56 UTC
Re: CNC coil winder traverse
Graham Stabler
2003-08-28 14:57:28 UTC
Re: CNC coil winder traverse
Alan Marconett KM6VV
2003-08-28 15:06:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC coil winder traverse
caudlet
2003-08-28 17:08:53 UTC
Re: CNC coil winder traverse