CAD CAM EDM DRO - Yahoo Group Archive

Re: Proxxon mill and touch probe

on 2003-09-01 08:46:39 UTC
Hi Graham -

No, I never built one. We had had a long thread on what
commercial digitizers must look like inside, and I just fleshed
out some ideas that others had explained. If the design works, it
should be pretty inexpensive to duplicate, even in small
quantities. A custom PCB for the contacts, debounce circuitry,
and maybe an LED indicator, would finish off a nice product. I
wouldn't mind one myself. I'd be happy to produce drawings of the
parts in exchange for components.

BTW, what software are you using for digitizing?

Regards,

Carlos Guillermo
VERVE Engineering & Design

-----Original Message-----
From: Graham Stabler [mailto:eexgs@...]
Sent: Sunday, August 31, 2003 10:50 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: Proxxon mill and touch probe

Carlos Guillermo wrote:
> Hi Graham -
>
> Nice pics! That digitizer probe looks familiar... Let us know
> how it works out.
>
> Regards,
>
>

Ah hah! You did the 3D model. Did you ever build one yourself?

I just need 6, 2mm ballbearings and I am ready to roll, no pun
intended. Please email me some if you have any :)

I reckon if I get results aything like with my Proxxon and delrin
then you guys with your servo systems and fancy steel should be
able
to make something that works really well!

I recently saw a touch probe that used an LED, two lenses and a
differential photodiode, very clever and possibly buildable from
the
optical side of things. You still need nice tilt mech though.

Cheers,

Graham

Discussion Thread

Graham Stabler 2003-08-29 01:54:53 UTC Proxxon mill and touch probe Carlos Guillermo 2003-08-30 23:24:06 UTC RE: [CAD_CAM_EDM_DRO] Proxxon mill and touch probe Graham Stabler 2003-08-31 10:52:00 UTC Re: Proxxon mill and touch probe James Cullins 2003-08-31 13:43:25 UTC Re: [CAD_CAM_EDM_DRO] Proxxon mill and touch probe Carlos Guillermo 2003-09-01 08:46:39 UTC Re: Proxxon mill and touch probe Graham Stabler 2003-09-01 13:47:57 UTC Re: Proxxon mill and touch probe