Re: [CAD_CAM_EDM_DRO] Nuts and Volts Magazine

Hi Bill,

Dan's articles in N&V a while back would be useful to have (I'd even
like to get a full set of those issues).

Other then that, I don't think a subscription based solely on an
interest in CNC would be justified. Better to read the past postings to
THIS and a few other lists!

If your are interested in Sherline, then as you probably know, there is
the Sherline list and my SherlineCNC list. There is also a Taig list,
and mini mill/lathe lists as well!

Yeah, we need our OWN MAGAZINE!

Alan KM6VV
SherlineCNC


Wkuehsel@... wrote:

>
> In searching their website I found that Nut and Volts Magazine ran at least
> one series of articles on CNC and the retrofit of a desktop milling machine.
> Is anyone familiar with the series and is worthwhile to obtain the 4 back
> issues at $5.00 each? Also, is it worthwhile for me to subscribe to Nuts and Volts
> given my CAD/CAM CNC interests? Frankly, I am new to this although I have
> been doing model engineering for years, and have a complete metal working shop
> as well as 40 years experience in the computer field. So, I would like to get
> a good baseline and have confidence in what I am doing, i.e., plan out and
> execute the program without flying blind. Will Nuts and Volts help establish
> this baseline?
>
> Thanks,
>
> Bill Kuehsel
> Cold Spring, NY
>
> AT HOME WITH COMPUTER NUMERICAL CONTROL (CNC) — PART 1 - Dan Mauch
> This article will explain the concepts of CNC and will be the first step in
> automating the home workshop
>
> THREE-AXIS CHOPPER, STEP MOTOR CONTROLLER FOR COMPUTER NUMERICAL CONTROL
> (CNC) APPLICATIONS — PART 2 - Dan Mauch
> This month, we build our three-axis, two-amp driver and do initial check-out
> so the controls are ready for our machine to be converted to CNC
>
> THREE-AXIS CHOPPER, STEP MOTOR CONTROLLER FOR COMPUTER NUMERICAL CONTROL
> (CNC) APPLICATIONS — PART 3 - Dan Mauch
> Configure, connect, adjust, and test the three-axis chopper driver built in
> last month’s artic
>
> THREE-AXIS CHOPPER, STEP MOTOR CONTROLLER FOR COMPUTER NUMERICAL CONTROL
> (CNC) APPLICATIONS — PART 4 - Dan Mauch
> Retrofitting a desktop milling machine for CNC
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/