Re: Sherline Z-axis ballscrew feed.
Posted by
jmorrphd2
on 2003-09-14 21:26:29 UTC
Tim:
Wouldn't two nuts on the leadscrew result in too much drag for the
stepper motor for the Z-axis? I thought that one of the attractions
of using ballscrews was the low friction and less wear than normal
thread-type leadscrews? I think a ballscrew for the z-axis is a
fine idea. Now, if someone can just do it and work the bugs out,
we can just retrofit our mills. ; ) -Jim
Wouldn't two nuts on the leadscrew result in too much drag for the
stepper motor for the Z-axis? I thought that one of the attractions
of using ballscrews was the low friction and less wear than normal
thread-type leadscrews? I think a ballscrew for the z-axis is a
fine idea. Now, if someone can just do it and work the bugs out,
we can just retrofit our mills. ; ) -Jim
Discussion Thread
Statman Designs, LLC
2003-09-14 18:06:51 UTC
Sherline Z-axis ballscrew feed.
RichD
2003-09-14 18:59:16 UTC
Re: [CAD_CAM_EDM_DRO] Sherline Z-axis ballscrew feed.
John Guenther
2003-09-14 19:01:16 UTC
RE: [CAD_CAM_EDM_DRO] Sherline Z-axis ballscrew feed.
Carol & Jerry Jankura
2003-09-14 19:29:10 UTC
RE: [CAD_CAM_EDM_DRO] Sherline Z-axis ballscrew feed.
Tim Goldstein
2003-09-14 19:51:00 UTC
RE: [CAD_CAM_EDM_DRO] Sherline Z-axis ballscrew feed.
Statman Designs, LLC
2003-09-14 20:10:30 UTC
Re: [CAD_CAM_EDM_DRO] Sherline Z-axis ballscrew feed.
Antonius J.M. Groothuizen
2003-09-14 20:29:41 UTC
Re: Sherline Z-axis ballscrew feed.
Tim Goldstein
2003-09-14 20:50:47 UTC
RE: [CAD_CAM_EDM_DRO] Sherline Z-axis ballscrew feed.
Tim Goldstein
2003-09-14 20:58:50 UTC
RE: [CAD_CAM_EDM_DRO] Re: Sherline Z-axis ballscrew feed.
jmorrphd2
2003-09-14 21:26:29 UTC
Re: Sherline Z-axis ballscrew feed.
Tim Goldstein
2003-09-14 23:08:52 UTC
RE: [CAD_CAM_EDM_DRO] Re: Sherline Z-axis ballscrew feed.
Tony Jeffree
2003-09-15 00:52:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Z-axis ballscrew feed.
ballendo
2003-09-15 08:25:38 UTC
Re: Sherline Z-axis ballscrew feed.
Antonius J.M. Groothuizen
2003-09-15 09:19:47 UTC
Re: Sherline Z-axis ballscrew feed.
Statman Designs, LLC
2003-09-15 09:20:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Z-axis ballscrew feed.
Carol & Jerry Jankura
2003-09-15 09:23:05 UTC
RE: [CAD_CAM_EDM_DRO] Re: Sherline Z-axis ballscrew feed.
RichD
2003-09-15 10:05:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Z-axis ballscrew feed.
Alan Marconett KM6VV
2003-09-15 11:07:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Z-axis ballscrew feed.
Tim Goldstein
2003-09-15 11:08:14 UTC
RE: [CAD_CAM_EDM_DRO] Re: Sherline Z-axis ballscrew feed.
ballendo
2003-09-16 05:36:02 UTC
Re: Sherline Z-axis ballscrew feed.
ballendo
2003-09-16 05:46:55 UTC
Re: Sherline Z-axis ballscrew feed.