Re: [CAD_CAM_EDM_DRO] Re: Taig Mill Conversion: Motor and Power Supply Selection

114 oz-in of RUNNING torque (Tony's emphasis) is probably a stronger stepper
motor than 200 oz-in of HOLDING torque. Must be difficult to rate the
running torque since it depends on how fast it is running, but that is
another point all together.

Daniel J. Statman, Statman Designs
www.statmandesigns.com
dan.statman@...

----- Original Message -----
From: "Tony Jeffree" <tony@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Cc: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, September 18, 2003 3:50 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Taig Mill Conversion: Motor and Power
Supply Selection


> 114 oz-in may be OK for a Sherline, but I would not recommend anything
less
> than around 200 oz-in motors for the Taig. The Taig CNC mill is fitted
with
> 200 oz-in motors as standard these days; while you might get away with
less
> on the X and Y axes (mine was originally fitted with 140 oz-in motors),
the
> Z definitely needs more than that.
>
> Regards,
> Tony
>
> At 19:21 18/09/2003 +0000, Antonius J.M. Groothuizen wrote:
>
> >You might want to take a look at US Digital's MS23's at $60 USD if
> >you want to buy new. These are rated at 114 in-oz RUNNING torque,
> >and were recommended by Mariss for a Sherline.
> >
> >Tony
> >
> >--- In CAD_CAM_EDM_DRO@yahoogroups.com, "khalique_rehman"
> ><khalique_rehman@y...> wrote:
> > > Hi Everyone,
> > > I am about to place an order for Taig CNC Ready Mill, 2019CR that I
> > > will convert to CNC (been in contact with Nick of CarterTools). I
> >am
> > > inclined to buy Geckos 210. I intend to use Taig with whatever is
> > > Taig capable of. Most importantly jewelry, among other things.
> > > Given this information, how I choose the steppers and power supply.
> > > What would be their specs and the sources to buy from?
> > > Thanks.
> > > kr.
> > > No CNC experience but eager to learn (cost effectively).
> >
> >
> >Addresses:
> >FAQ: http://www.ktmarketing.com/faq.html
> >FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> >Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> >timg@...
> >Moderator: pentam@... indigo_red@... [Moderators]
> >URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> >OFF Topic POSTS: General Machining
> >If you wish to post on unlimited OT subjects
> >goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> >reach it if you have trouble.
> >http://www.metalworking.com/news_servers.html
> >
> >http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> >sister site to the CCED group, as many of the same members are there, for
> >OT subjects, that are not allowed on the CCED list.
> >
> >NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> >THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> >bill
> >List Mom
> >List Owner
> >
> >
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
> Regards,
> Tony
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>