Re: Taig Mill Conversion: Motor and Power Supply Selection

I am surprised to see the prompt responses. you guys are great. I
now feel much confident.
Yes Tony, I know it comes with 200oz/in. In fact I want to have more
power/speed if Taig can handle it. What is the practical limit for
Taig?
kr
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Tony Jeffree <tony@j...>
wrote:

> 114 oz-in may be OK for a Sherline, but I would not recommend

anything less

> than around 200 oz-in motors for the Taig. The Taig CNC mill is

fitted with

> 200 oz-in motors as standard these days; while you might get away

with less

> on the X and Y axes (mine was originally fitted with 140 oz-in

motors), the

> Z definitely needs more than that.
>
> Regards,
> Tony
>
> At 19:21 18/09/2003 +0000, Antonius J.M. Groothuizen wrote:
>
> >You might want to take a look at US Digital's MS23's at $60 USD if
> >you want to buy new. These are rated at 114 in-oz RUNNING torque,
> >and were recommended by Mariss for a Sherline.
> >
> >Tony
> >
> >--- In CAD_CAM_EDM_DRO@yahoogroups.com, "khalique_rehman"
> ><khalique_rehman@y...> wrote:
> > > Hi Everyone,
> > > I am about to place an order for Taig CNC Ready Mill, 2019CR

that I

> > > will convert to CNC (been in contact with Nick of

CarterTools). I

> >am
> > > inclined to buy Geckos 210. I intend to use Taig with whatever

is

> > > Taig capable of. Most importantly jewelry, among other things.
> > > Given this information, how I choose the steppers and power

supply.

> > > What would be their specs and the sources to buy from?
> > > Thanks.
> > > kr.
> > > No CNC experience but eager to learn (cost effectively).
> >
> >
> >Addresses:
> >FAQ: http://www.ktmarketing.com/faq.html
> >FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> >Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,

wanliker@a...,

> >timg@k...
> >Moderator: pentam@c... indigo_red@q... [Moderators]
> >URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> >OFF Topic POSTS: General Machining
> >If you wish to post on unlimited OT subjects
> >goto: aol://5863:126/rec.crafts.metalworking or go thru

Google.com to

> >reach it if you have trouble.
> >http://www.metalworking.com/news_servers.html
> >
> >http://groups.yahoo.com/group/jobshophomeshop I consider this

to be a

> >sister site to the CCED group, as many of the same members are

there, for

> >OT subjects, that are not allowed on the CCED list.
> >
> >NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY

POSTING

> >THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO

EXCEPTIONS........

> >bill
> >List Mom
> >List Owner
> >
> >
> >
> >Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

>
> Regards,
> Tony