Re: [CAD_CAM_EDM_DRO] servo ??

huiostheios wrote:

>100 V 100W 0.319N.m, 3000rpm Would this be a sufficient servo for
>retrofitting a H.F 2 hp mill??
>
>

100 W is pretty marginal, unless this is a continuous rating, which it could
be. If the peak rating is at least 500 W, then it should be fine. If
you use
ballscrews, that eases the load on the motor considerably. You don't
state what size this machine is. Is this a benchtop mill?

Jon