Re: CNC Converting Questions
Posted by
Ron Steele
on 2003-09-23 17:59:41 UTC
Hi Larry,
I am also converting a mini-mill(Harbor Freight) to CNC. I am using
a kit to save time. It is from: http://members.cox.net/kdntool/.
Take a look at this site and you may decide to go with this setup
also. Along with basic kits they sell motors, controllers, software
and coming soon, ball screws for the X and Y axis.
Regards,
Ron-
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "lcasey_lifestill"
<lcase2@l...> wrote:
I am also converting a mini-mill(Harbor Freight) to CNC. I am using
a kit to save time. It is from: http://members.cox.net/kdntool/.
Take a look at this site and you may decide to go with this setup
also. Along with basic kits they sell motors, controllers, software
and coming soon, ball screws for the X and Y axis.
Regards,
Ron-
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "lcasey_lifestill"
<lcase2@l...> wrote:
> Hello all,money.
>
> I am a new to the process of converting machines to CNC, but am very
> interested in learning as much as possible before I spend any
>get
> I have read through a good part of this list and find a lot of this
> information educational, but overwhelming. I have not been able to
> a firm grasp of how some of you determined the proper motor size forusing
> you conversions. Many of you, having the same mill (or similar)
> different sized motors. Who is correct? Maybe all of them work, butthe
> what is the best way to calculate the proper size to be sure that
> motor is not over stressed or under driven? With so many factors,lead
> where to start? Then on top of that, you have driver selection and
> servos or stepper. Can somebody please help me in figuring out these
> numbers?
>
> Machine to convert: MicroMark Mini-Mill
>
> How would you calculate the in-oz needed to hold, turn or turn to
> screw under load?
>
> What is the best way to control these motors, Gecko or Rutted? Maybe
> some other?
>
> How about motor, server or stepper?
>
> I know this message packs a punch, but any help will work:)
>
> Thanks
>
> --Larry
Discussion Thread
lcasey_lifestill
2003-09-23 07:26:41 UTC
CNC Converting Questions
Jon Elson
2003-09-23 10:01:24 UTC
Re: [CAD_CAM_EDM_DRO] CNC Converting Questions
Chris Cowley
2003-09-23 17:59:20 UTC
Re: [CAD_CAM_EDM_DRO] CNC Converting Questions
Ron Steele
2003-09-23 17:59:41 UTC
Re: CNC Converting Questions
knives01us
2003-09-24 03:06:10 UTC
Re: CNC Converting Questions
Jon Elson
2003-09-24 10:07:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC Converting Questions
Laurence Casey
2003-09-26 07:10:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC Converting Questions
JanRwl@A...
2003-09-26 11:50:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC Converting Questions