CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] BP Retrofit - Major Fork In The Road?

Posted by C.S. Mo
on 2003-09-29 14:05:47 UTC
Why not use Jon Elson's board to provide analog voltage output? Then you
could use EMC...

--C.S.

>Another potential route is to use something like the Rutex boards
>which take a step/dir signal and convert it into an analog voltage
>output which I could send to my drives. I'm not sure whether I
>would send my encoder feedback to the Rutex or the Aerotech drives
>and wonder if overall the accuracy of the system would be compromised
>by this setup. The good news is I would be able to use the more user
>friendly software for the interface.

Discussion Thread

natchamp_87 2003-09-29 13:57:37 UTC BP Retrofit – Major Fork In The Road? C.S. Mo 2003-09-29 14:05:47 UTC Re: [CAD_CAM_EDM_DRO] BP Retrofit - Major Fork In The Road? natchamp_87 2003-09-29 18:50:56 UTC Re: BP Retrofit - Major Fork In The Road? Jon Elson 2003-09-29 21:52:58 UTC Re: [CAD_CAM_EDM_DRO] Re: BP Retrofit - Major Fork In The Road? cdmurphy_2000 2003-09-29 22:46:23 UTC Re: BP Retrofit - Major Fork In The Road? stevenson_engineers 2003-09-30 01:27:14 UTC Re: BP Retrofit – Major Fork In The Road?