CAD CAM EDM DRO - Yahoo Group Archive

Re: toroid transformer - out of phase

on 2003-10-01 17:38:03 UTC
> >
> > Interesting idea.
> >
> > does running them out of phase effect the current of the
output ?
> > would it be the same as the the higher voltage rating or changed
> by
> > the lower one ?
> >
> > Also, is the input current effected by this ?
> >
> > Dave
>
>
> Dave,
>
> I'm not sure how this will affect the input current. My guess would
> be it doesnt but i'm not sure. I mean there is no current flowing
> due to them being out of phase.
>
> The current would be limited by whatever tap has the lower rating.
>
>
> Thomas,
>
> I'm not sure what voltage your looking for but if you plan on
> running geckos then 220 will not be an option. 110 is be redily
> available so its no big deal. The DC voltage obtained is roughly
> 1.41 (root 2) times the AC voltage.
>
> Mark

too far removed.....

If one puts 110 on the 220 line, that drops the 118 to 59vac.
Therfore, 59 less 1.4 for the rectifier drop = 57.6 VAC, with the
filer cap, 57.6 VAC x 1.414 you jump to 81.4 VDC not too bad.

A couple of diodes and it's under 80V, use the second secondary to
drop the first secondary ? not sure exactly how that works, but if
it does, then great.

Dave

Discussion Thread

Thomas Powell 2003-09-30 16:07:24 UTC toroid transformer Jon Elson 2003-09-30 19:00:27 UTC Re: [CAD_CAM_EDM_DRO] toroid transformer turbulatordude 2003-09-30 19:57:58 UTC Re: toroid transformer Bill Kichman 2003-09-30 21:51:04 UTC Re: [CAD_CAM_EDM_DRO] toroid transformer mmurray701 2003-10-01 07:59:08 UTC Re: toroid transformer turbulatordude 2003-10-01 16:03:28 UTC Re: toroid transformer - out of phase mmurray701 2003-10-01 16:48:59 UTC Re: toroid transformer - out of phase turbulatordude 2003-10-01 17:38:03 UTC Re: toroid transformer - out of phase Antonius J.M. Groothuizen 2003-10-01 19:34:55 UTC Re: toroid transformer - back to basics Jon Elson 2003-10-01 23:02:47 UTC Re: [CAD_CAM_EDM_DRO] Re: toroid transformer - out of phase Thomas Powell 2003-10-02 09:14:47 UTC Re: [CAD_CAM_EDM_DRO] toroid transformer Thomas Powell 2003-10-03 23:30:18 UTC Re: [CAD_CAM_EDM_DRO] Re: toroid transformer - back to basics turbulatordude 2003-10-04 05:06:37 UTC Re: toroid transformer - back to basics Thomas Powell 2003-10-05 00:04:29 UTC Re: [CAD_CAM_EDM_DRO] Re: toroid transformer - back to basics