Re: [CAD_CAM_EDM_DRO] EMC and RT Linux
Posted by
Karl Klemm
on 2000-03-28 09:34:19 UTC
I have most of the EMC builds from September to now excluding December on
my website. All you have to do is right click on the files and select
save. My website is http://rockon.res.wpi.net click on the EMC link and
you should be able to find it from there. All the files for my website
are kept locally on my PC so if you have any problems you can just email
me. I hope this helps anyone in need.
Karl
my website. All you have to do is right click on the files and select
save. My website is http://rockon.res.wpi.net click on the EMC link and
you should be able to find it from there. All the files for my website
are kept locally on my PC so if you have any problems you can just email
me. I hope this helps anyone in need.
Karl
On Tue, 28 Mar 2000, Darrell wrote:
> From: "Darrell" <dgehlsen@...>
>
> Tim,
> Please explain "old fashioned way from a command prompt"
> Darrell
>
> > From: "Tim Goldstein" <timg@...>
> >
> > I have a hard time reaching it from a web browser, but it is pretty
> reliable
> > from an FTP client. You may want to try doing it the old fashion way from
> a
> > command prompt if you don't have any FTP software.
> >
> > Tim
> > [Denver, CO]
>
>
>
> ------------------------------------------------------------------------
> LOW RATE, NO WAIT!
> Get a NextCard Visa, in 30 seconds! Get rates
> as low as 2.9% Intro or 9.9% Fixed APR and no hidden fees.
> Apply NOW!
> http://click.egroups.com/1/2122/2/_/423600/_/954264599/
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>
Discussion Thread
bdoherty@i...
2000-03-28 06:41:22 UTC
EMC and RT Linux
Tim Goldstein
2000-03-28 06:47:28 UTC
RE: [CAD_CAM_EDM_DRO] EMC and RT Linux
Darrell
2000-03-28 09:30:03 UTC
Re: [CAD_CAM_EDM_DRO] EMC and RT Linux
Karl Klemm
2000-03-28 09:34:19 UTC
Re: [CAD_CAM_EDM_DRO] EMC and RT Linux
bdoherty@i...
2000-03-29 10:32:18 UTC
Re: RE: [CAD_CAM_EDM_DRO] EMC and RT Linux