Re: [CAD_CAM_EDM_DRO] Re: cnc pc board question

No, none of these boards run the motor directly. To my
knowlege I don't know of any that do. Most setups use
a motion card installed in your computer which is
conected to some sort of breakout module then wiring
from this ties into your amps, encoders, resolvers,
limits, aux buttons ect.



--- Original Message ---
From: "turbulatordude" <davemucha@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: cnc pc board question

>--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Marc

Wullaert"

><marc.wullaert10@y...> wrote:
>> Try http://www.jraco.com
>>
>> Greetz,
>> Marcus
>
>
>In these links it seems they call the card a

controller card and have

>an external ampliphier or what we often call a driver.
>
>Seems the parallel port is free and you only need to

buy the driver

>such as a Gecko. and that would be much less

expensive.

>
>Am I missing something here ?
>
>do any of these cards run the motor directly ?
>
>Dave
>
>>
>>
>> ----- Original Message -----
>> From: "nltnme_2" <nltnme_2@y...>
>> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
>> Sent: Saturday, October 11, 2003 5:30 PM
>> Subject: [CAD_CAM_EDM_DRO] cnc pc board question
>>
>>
>> > does anyone know of a board that can be

installed "inside" a pc,

>and
>> > then used to control the cnc motors. I thought I

saw on a web site

>> > once, can't find it now, an inexpensive board

that installed in a

>> > slot on mother board, that had output ports for 4-

axises.

>> >
>> > Help is appreciated. Thanks in advance
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES:

http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-

subscribe@yahoogroups.com

>Unsubscribe: CAD_CAM_EDM_DRO-

unsubscribe@yahoogroups.com

>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,

wanliker@..., timg@...

>Moderator: pentam@... indigo_red@...

[Moderators]

>URL to this group:

http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto:

aol://5863:126/rec.crafts.metalworking or go thru
Google.com to reach it if you have trouble.

>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I

consider this to be a sister site to the CCED group,
as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC

DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
ACCEPT THIS.....NO EXCEPTIONS........

>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

>
>