CAD CAM EDM DRO - Yahoo Group Archive

Re: Digitizer probe cad files?

on 2003-10-17 17:12:17 UTC
My digitizer is shown in action in the files section,

digitizer_result.jpg and follows the basic idea shown in digitizer.pdf

I have some drawings but much of it is incomplete as I changed things
as I went along. I have intended to make a website of my project
along with plans (free of course) but have been bogged down with
other projects.

I could try at least and upload some of the pics I took of the mech
onto my website. It is really pretty simple but works very well.

Cheers,

Graham

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Bill Kichman"
<billkichman@c...> wrote:
> Does anybody have a known-good design for a digitizer for the mill,
such as
> the nice example shown in the files area?
> Don't want to reinvent the wheel here, and I figured this would be
a fine
> first project to test out the new mill coversion...
>
> R. William Kichman, P.E.
> Kichman Engineering Associates
> 103 Old Furnace Road
> Cornwall, PA 17016-0643
> tel/fax 717/270-0714

Discussion Thread

Bill Kichman 2003-10-17 10:30:19 UTC Digitizer probe cad files? Graham Stabler 2003-10-17 17:12:17 UTC Re: Digitizer probe cad files? Robert Adams 2003-10-19 09:27:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizer probe cad files?