Re: [CAD_CAM_EDM_DRO] Re: Digitizer probe cad files?

Hi Graham,
You did a great job on your Digitizer. Will be looking foward to more info.
What software are you using for your Digitizer?
Thanks
Bob

>From: "Graham Stabler" <eexgs@...>
>Reply-To: CAD_CAM_EDM_DRO@yahoogroups.com
>To: CAD_CAM_EDM_DRO@yahoogroups.com
>Subject: [CAD_CAM_EDM_DRO] Re: Digitizer probe cad files?
>Date: Sat, 18 Oct 2003 00:12:13 -0000
>
>
>My digitizer is shown in action in the files section,
>
>digitizer_result.jpg and follows the basic idea shown in digitizer.pdf
>
>I have some drawings but much of it is incomplete as I changed things
>as I went along. I have intended to make a website of my project
>along with plans (free of course) but have been bogged down with
>other projects.
>
>I could try at least and upload some of the pics I took of the mech
>onto my website. It is really pretty simple but works very well.
>
>Cheers,
>
>Graham
>
>--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Bill Kichman"
><billkichman@c...> wrote:
> > Does anybody have a known-good design for a digitizer for the mill,
>such as
> > the nice example shown in the files area?
> > Don't want to reinvent the wheel here, and I figured this would be
>a fine
> > first project to test out the new mill coversion...
> >
> > R. William Kichman, P.E.
> > Kichman Engineering Associates
> > 103 Old Furnace Road
> > Cornwall, PA 17016-0643
> > tel/fax 717/270-0714
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto:
>aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
>you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for
>OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
>DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

_________________________________________________________________
Never get a busy signal because you are always connected with high-speed
Internet access. Click here to comparison-shop providers.
https://broadband.msn.com