Rigid Tapping--How is this accomplished?
Posted by
P. J. Hicks
on 2003-10-20 14:27:03 UTC
Kim,
I started out with a largish hand tap set of foriegn mfg. and they have
served me well for many years. The old saying that "s... happens" means you
will break taps as you build projects so in my case I replaced the broken
ones with spiral (gun) taps. This way you will gradually replace the most
frequently used taps with better quality taps. The others will do for the
occasional use over the years. I'm sure there are sets but don't recall
seeing any in my catalogs.
PJH
I started out with a largish hand tap set of foriegn mfg. and they have
served me well for many years. The old saying that "s... happens" means you
will break taps as you build projects so in my case I replaced the broken
ones with spiral (gun) taps. This way you will gradually replace the most
frequently used taps with better quality taps. The others will do for the
occasional use over the years. I'm sure there are sets but don't recall
seeing any in my catalogs.
PJH
Discussion Thread
Steve
2003-10-19 17:19:14 UTC
Re: [CAD_CAM_EDM_DRO] Rigid Tapping--How is this accomplished?
Jon Elson
2003-10-19 22:22:28 UTC
Re: [CAD_CAM_EDM_DRO] Rigid Tapping--How is this accomplished?
Kim Lux
2003-10-20 07:57:30 UTC
Re: [CAD_CAM_EDM_DRO] Rigid Tapping--How is this accomplished?
jmkasunich
2003-10-20 08:43:15 UTC
Re: Rigid Tapping--How is this accomplished?
Kim Lux
2003-10-20 09:02:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rigid Tapping--How is this accomplished?
doug98105
2003-10-20 09:32:34 UTC
Re: Rigid Tapping--How is this accomplished?
Kim Lux
2003-10-20 09:42:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rigid Tapping--How is this accomplished?
doug98105
2003-10-20 10:07:16 UTC
Re: Rigid Tapping--How is this accomplished?
Jon Elson
2003-10-20 10:50:08 UTC
Re: [CAD_CAM_EDM_DRO] Rigid Tapping--How is this accomplished?
Kim Lux
2003-10-20 11:20:13 UTC
Re: [CAD_CAM_EDM_DRO] Rigid Tapping--How is this accomplished?
Kim Lux
2003-10-20 11:22:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rigid Tapping--How is this accomplished?
Damon
2003-10-20 12:38:48 UTC
Re: Rigid Tapping--How is this accomplished?
doug98105
2003-10-20 14:26:21 UTC
Re: Rigid Tapping--How is this accomplished?
P. J. Hicks
2003-10-20 14:27:03 UTC
Rigid Tapping--How is this accomplished?
Tom & Roberta
2003-10-20 18:46:26 UTC
Re: [CAD_CAM_EDM_DRO] Rigid Tapping--How is this accomplished?
jmkasunich
2003-10-22 07:56:51 UTC
Re: Rigid Tapping--How is this accomplished?