Re: Tabel to spindle clearance of small CNC Mill
Posted by
rotarysmp
on 2003-11-06 02:03:20 UTC
Thanks Jon and Kim.
I have the mill, and it has 12 inches of travel, so It really just
comes down to finding the best compromise for optimising it's travel.
Might look at mounting the head on a plate with a coouple of sets of
location holes.
Mark.
I have the mill, and it has 12 inches of travel, so It really just
comes down to finding the best compromise for optimising it's travel.
Might look at mounting the head on a plate with a coouple of sets of
location holes.
Mark.
Discussion Thread
rotarysmp
2003-11-03 07:37:45 UTC
Tabel to spindle clearance of small CNC Mill
Jon Elson
2003-11-03 10:07:55 UTC
Re: [CAD_CAM_EDM_DRO] Tabel to spindle clearance of small CNC Mill
rotarysmp
2003-11-05 05:54:07 UTC
Re: Tabel to spindle clearance of small CNC Mill
Kim Lux
2003-11-05 07:19:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tabel to spindle clearance of small CNC Mill
Jon Elson
2003-11-05 09:19:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tabel to spindle clearance of small CNC Mill
rotarysmp
2003-11-06 02:03:20 UTC
Re: Tabel to spindle clearance of small CNC Mill