Re: [CAD_CAM_EDM_DRO] cable help
Posted by
brian reid
on 2003-11-16 17:56:33 UTC
Hi Les,
Thanks for the reply. my only hope is to find software and run it of the BBC computer
all the best
brian
Les Newell <lesnewell@...> wrote:
Hi Brian,
As far as I know there is no way of connecting the TCL125 to a pc
without replacing the controller board.
I am in the process of refitting one for PC control. I have replaced the
original controller board with a home-made breakout board. I also had to
replace the stepper drives with Xylotex drives as the original drives
were very slow and unreliable. The later TCL125s used step driver
modules that would probably work OK. If you can hear a slight
hissing/whistling noise from the steppers when the machine is on, you
have the later drives.
If you have any other questions I can probably help.
Les
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
---------------------------------
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
[Non-text portions of this message have been removed]
Thanks for the reply. my only hope is to find software and run it of the BBC computer
all the best
brian
Les Newell <lesnewell@...> wrote:
Hi Brian,
As far as I know there is no way of connecting the TCL125 to a pc
without replacing the controller board.
I am in the process of refitting one for PC control. I have replaced the
original controller board with a home-made breakout board. I also had to
replace the stepper drives with Xylotex drives as the original drives
were very slow and unreliable. The later TCL125s used step driver
modules that would probably work OK. If you can hear a slight
hissing/whistling noise from the steppers when the machine is on, you
have the later drives.
If you have any other questions I can probably help.
Les
>Hi,Addresses:
>I bought a boxford 125 CTL which ran on an old BBC computer at auction
>can anyone advise on running it from a PC.do i need a cable convertion
>and software?the machine works as we can jog and turn on spindle.
>thanx in advance
>
>brian reid
>
>
>
>
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
---------------------------------
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
[Non-text portions of this message have been removed]
Discussion Thread
bbrreid2001
2003-11-16 12:43:30 UTC
cable help
Les Newell
2003-11-16 12:57:31 UTC
Re: [CAD_CAM_EDM_DRO] cable help
brian reid
2003-11-16 17:56:33 UTC
Re: [CAD_CAM_EDM_DRO] cable help