Re: [CAD_CAM_EDM_DRO] PIC DRO

This really works doesn't it? Have you got a url for them.

Regards,

Terry.

----- Original Message -----
From: Tim Goldstein
To: CAD_CAM_EDM_DRO@egroups.com
Sent: Thursday, April 06, 2000 1:02 AM
Subject: Re: [CAD_CAM_EDM_DRO] PIC DRO


Jon,

You just described the encoder and disk that is available from Electronic
Goldmine as their motor with optical tach. Total price is about $4.00 and
you get a nice 24 VDC brushed motor for your favorite robot project to go
along with a 1000 slot metal disk and a HP encoder head. OK, you do have to
disassemble the parts.

Tim
[Denver, CO]

> You can get 1000 line/rev encoders in 2 pieces from HP. The disc
> (metal) is
> one piece, the read head is another piece. So, you have to make your
> own
> housing. You would get 4000 counts/rev from these. They DO cost more
> than
> the US Digital units, but are probably higher quality.
>
> Thanks,
>
> Jon



------------------------------------------------------------------------------



------------------------------------------------------------------------------
Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager



[Non-text portions of this message have been removed]