Re: [CAD_CAM_EDM_DRO] Re: CNC knocking out phone system?? Help!!!
Posted by
Peter Renolds
on 2003-12-01 15:04:29 UTC
Hi Ron,
Are you running a VFD on your spindle? That could be a more likely
source of emi than the servos. Depending on who makes your VFD you
might look into an emi filter for the VFD. I had to fit one recently
due to the VFD noise upsetting the temperature control on a nearby
kiln. My VFD was from Practical Automation and the emi filter cost $95
as I recall. It solved my emi problem completely.
Cheers, Peter
Are you running a VFD on your spindle? That could be a more likely
source of emi than the servos. Depending on who makes your VFD you
might look into an emi filter for the VFD. I had to fit one recently
due to the VFD noise upsetting the temperature control on a nearby
kiln. My VFD was from Practical Automation and the emi filter cost $95
as I recall. It solved my emi problem completely.
Cheers, Peter
>
>
Discussion Thread
rogersmach
2003-12-01 09:40:07 UTC
CNC knocking out phone system?? Help!!!
bull2003winkle
2003-12-01 14:04:49 UTC
Re: CNC knocking out phone system?? Help!!!
Peter Renolds
2003-12-01 15:04:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC knocking out phone system?? Help!!!
ccq@x...
2003-12-01 20:53:23 UTC
Re: [CAD_CAM_EDM_DRO] CNC knocking out phone system?? Help!!!
John Delaney
2003-12-01 23:00:47 UTC
Re: CNC knocking out phone system?? Help!!!
industrialhobbies
2003-12-02 05:54:29 UTC
Re: CNC knocking out phone system?? Help!!!
R Rogers
2003-12-06 07:31:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: CNC knocking out phone system?? Help!!! :Resolved issue: