Cut my first parts!!!!!!!!!!!!!

Got my router to the testing stage today. Cut some simple foam shapes.
Everything worked perfect, except I had the z axis reversed and drilled a
nice 1/4" hole in my table.

Cutting area 32" x 48", 6 " z axis, nema 23 motors, Hobbycnc controler and
Mach2 software.

This stuff is kinda fun!!!!!!!!!

Mike Hammel
1704 Bullard
Arkansas City, KS
67005

----- Original Message -----
From: "John Delaney" <john.p.delaney@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, December 07, 2003 8:30 PM
Subject: [CAD_CAM_EDM_DRO] Re: "newbie" ?? about steppers, servos


> Anyway, this ?? has
> > probably been asked before, but please point in me in the right
> > direction. Thanks, Tom in Ga.
>
> Tom:
>
> I've been at this machining thing now for about two years. I still
> consider myself new at it. Fortunately there are many fine folks here
> and on the other message boards related to this willing to share and
> help. I recently learned of the job shop home shop board here on
> Yahoo. There is the 7x10 mini lathe group that actually gets into
> some interesting discussions related to building machines (lots of OT
> stuff there). I recently joined the bridgeport group 'cause I bought
> one last week.
>
> I would also check out any groups or internet sites related to
> robotics. These people are building interesting machines so the
> methods cross over.
>
> Thanks,
> -jd
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>