CAD CAM EDM DRO - Yahoo Group Archive

Re: Manual Pulse Generator Question

on 2003-12-14 10:46:17 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "jcc3inc" <jccinc@o...> wrote:
> Gentlemen:
>
> I have been considering adding a manual pulse generator to the CNC
> controller which I have built. My questions are:
> 1) Will ONE MPG be used to operate all (3) or (4) axes?
> 2) Are the pulses multiplied by 1, 10, 100 or ??
> 3) Is there a max feedrate applied to the MPG input?
> 4) If the speed is fast, is accel and decel applied in the system?
>
> Thanks for your comments here.
>
> Merry Christmas to you all,
> Jack C.

Depends what you want.

if you are looking for testing, then there is no real needs.

if you are making a manual handwheel, then all of the above.

if you are just jogging the machine, then a manual selection switch
for the axis is approprate.

ditto for speeds max feedrate is that of the machine. a seperate
button for rapids would be desired.

and yes on accel and decel.

Dave

Discussion Thread

jcc3inc 2003-12-14 08:10:16 UTC Manual Pulse Generator Question turbulatordude 2003-12-14 10:46:17 UTC Re: Manual Pulse Generator Question