RE: [CAD_CAM_EDM_DRO] PIC DRO stupid question
Posted by
Wayne Bengtsson
on 2000-04-07 02:21:35 UTC
-----Original Message-----
From: Jon Elson [mailto:jmelson@...]
Sent: Friday, 7 April 2000 1:58 AM
To: CAD_CAM_EDM_DRO@egroups.com
Subject: Re: [CAD_CAM_EDM_DRO] PIC DRO stupid question
in a good CAD program, and print the pattern on to transparency material
using the best quality injet printer you have access to.
I am assuming a resolution of 300 DPI would translate into .003" accuracy,
at a minimum. If anyone here has actually tested the output of a printer for
accuracy, I would be very interested to see the numbers.
Ok, that's the hard part done, how do you do the easy bits? :-)
Best regards
Wayne Bengtsson
From: Jon Elson [mailto:jmelson@...]
Sent: Friday, 7 April 2000 1:58 AM
To: CAD_CAM_EDM_DRO@egroups.com
Subject: Re: [CAD_CAM_EDM_DRO] PIC DRO stupid question
>Really, if someone can come up with accurate grating patterns on film orOne quick and easy way to make such a pattern would be to draw the pattern
>glass, it is fairly
>easy to make your own linear encoder. Does anyone have any ideas on
>where to get
>such grating patterns?
in a good CAD program, and print the pattern on to transparency material
using the best quality injet printer you have access to.
I am assuming a resolution of 300 DPI would translate into .003" accuracy,
at a minimum. If anyone here has actually tested the output of a printer for
accuracy, I would be very interested to see the numbers.
Ok, that's the hard part done, how do you do the easy bits? :-)
Best regards
Wayne Bengtsson
Discussion Thread
mgrady
2000-04-05 17:24:57 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO stupid question
Jon Elson
2000-04-06 10:58:06 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO stupid question
Wayne Bengtsson
2000-04-07 02:21:35 UTC
RE: [CAD_CAM_EDM_DRO] PIC DRO stupid question
Marshall Pharoah
2000-04-07 05:22:29 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO stupid question
David Howland
2000-04-07 11:47:22 UTC
RE: [CAD_CAM_EDM_DRO] PIC DRO stupid question
Jon Elson
2000-04-07 13:01:09 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO stupid question