Re: [CAD_CAM_EDM_DRO] Re: Harbor Freight 47052 to CNC

Don,

Thanks for the heads up on the table.

> I'll sell you mine for $80 including
> shipping and you can have a try.

a generous offer, but i would rather get it straight from HF so i can
harass them if its really not fixable.

Regards
C Cowley

On Tue, 2003-12-16 at 01:22, Don Rogers wrote:
> At 06:27 AM 12/16/03 +0000, you wrote:
>
> >has anyone considered or completed a conversion of this rotary table to
> >cnc?
> >
> >http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=47052
> >
> >anyone seen a review or detailed information on this table?
>
> I purchased one a few months back to convert to a cnc table. It looks very
> good. However, I pulled out the screw to see about backlash, and how to
> mount the motor. I wasn't that pleased with the setup. I later decided to
> go with a Taig headstock and make my own rotary table.
>
> If you are interested in one to try, I'll sell you mine for $80 including
> shipping and you can have a try. It has never been mounted on a table. No
> modifications, other than wiping off the grease.
>
> Don
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>