CAD CAM EDM DRO - Yahoo Group Archive

Re: Configuring EMC with Freqmod

Posted by Ray Henry
on 2003-12-21 07:58:13 UTC
> Date: Sun, 21 Dec 2003 03:14:21 -0000
> From: "wwashington2k" <wwashington@...>
> Subject: Configuring EMC with Freqmod
>
> I'm trying to get EMC to work with freqmod. I have one axis
> connected. I'm trying to jog the stepper, but I can only get X Step
> pulses when I press the - button. The + button works one-time when I
> first enter the program. The display increments, but I don't receive
> any X step pulses. The - button works fine.
>
> Does anyone have any ideas?

My WAG is that you've got step and direction pins reversed. I did this
once. You should be able to see it with Scripts -> IO_Show. Jog the
axis slowly and watch the first two "lights."

Ray

Discussion Thread

wwashington2k 2003-12-20 19:40:09 UTC Configuring EMC with Freqmod Ray Henry 2003-12-21 07:58:13 UTC Re: Configuring EMC with Freqmod Jon Elson 2003-12-21 15:29:30 UTC Re: [CAD_CAM_EDM_DRO] Configuring EMC with Freqmod wwashington2k 2003-12-21 19:11:35 UTC Re: Configuring EMC with Freqmod Ray Henry 2003-12-22 06:42:48 UTC Re: Re: Configuring EMC with Freqmod