CAD CAM EDM DRO - Yahoo Group Archive

Re: Re: Configuring EMC with Freqmod

Posted by Ray Henry
on 2003-12-22 06:42:48 UTC
> From: "wwashington2k" <wwashington@...>
> ...If I had
> to guess, I believe I have something incurrately specified in my
> emc.ini file. Maybe the program thinks the axis is at some limit?
> When I installed the EMC, I had to change several polarities. I
> don't get any messages, the motor/signals simply refuse to move in
> the + direction.

If the tkemc or mini display shows the position letters in red then you
are sitting on a limit switch or have defined the limit polarities
backwards. But if it will move in one direction and not in the other
then the problem is not the limits.

Ray

Discussion Thread

wwashington2k 2003-12-20 19:40:09 UTC Configuring EMC with Freqmod Ray Henry 2003-12-21 07:58:13 UTC Re: Configuring EMC with Freqmod Jon Elson 2003-12-21 15:29:30 UTC Re: [CAD_CAM_EDM_DRO] Configuring EMC with Freqmod wwashington2k 2003-12-21 19:11:35 UTC Re: Configuring EMC with Freqmod Ray Henry 2003-12-22 06:42:48 UTC Re: Re: Configuring EMC with Freqmod