Re: [CAD_CAM_EDM_DRO] Re: Wiring Soundlogic/Campbelldesigns Breakout Board

Dave
Contact me at james_cullins@... and I will send you a drawing
for wiring your machine.
Jim

----- Original Message -----
From: "turbulatordude" <davemucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, December 27, 2003 12:42 PM
Subject: [CAD_CAM_EDM_DRO] Re: Wiring Soundlogic/Campbelldesigns Breakout
Board


> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "anthony_annicchiarico"
> <anthony_annicchiarico@y...> wrote:
> > I'm very bad in electrical subject !
> >
> > I'm trying to wire a Soundlogic/Campbelldesigns Breakout Board Plus
> > for MACH2. I uses Gecko 201, XYZ Home Switch , XYZ limit switch
> (one
> > per axis), a relay for spindle on/off, another relay for a dust
> > collector and a Estop and a power supply for my geckos.
> >
> > 1) Is anyone here able to draw me a wiring diagram, indicating me
> how
> > to wire all my parts (particularly Estop) and what type of AWG wire
> I
> > have to use ? you can send be the schemes by Mail.
> >
> > 2) advice to choose my relays (part references would be appreciate)
> >
> > 3) advice to choose my limit and home switches (part references
> would
> > be appreciate)
> >
> > 4)what is the PCB relay board mention in the board manual,
> advantages
> > and drawbacks to use it ? and how to build it ?
>
>
> Hi,
>
> It seems you are asking for a whole lot. Probably best to study the
> 15 page manual and address specific questions to whomever you bought
> it from.
>
> Also, study Ohms law a little to figure out your end switches and
> wire sizes.
>
> None of this is really hard, but for you to have no knoledge of what
> you are doing makes it actually dangerous for others to give you
> really in depth information.
>
> One little mistake and you could fry lots of things.
>
> Dave
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>