Re: Wiring Soundlogic/Campbelldesigns Breakout Board

Bob:

I got mine in the mail yesterday, and it is great.

I do some questions about the gecko and relay hookup:
- Step 17 directs "connect the G. drives according to the
G.installation sheet..." That's Mariss's sheet, correct? That would
mean setting the pin array for +5?

- For the relay switch: I'm planning to use a 15 amp router, 110 ac
voltage, for my spindle. I'm inclined to use a mechanical relay,
thinking it might be safer. Most wiring diagrams advise using a diode
to guard against voltage spikes in the relay circuit. Does the card
provide this protection ?

Thanks for your time.

Tom




--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Thomas Powell" <tppjr@h...>
wrote:

> Bob,
>
> Did you ever get that info together?
>
> Thomas Powell
>
> ----- Original Message -----
> From: "Robert Campbell" <bob@c...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Saturday, December 27, 2003 8:51 AM
> Subject: Re: [CAD_CAM_EDM_DRO] Wiring Soundlogic/Campbelldesigns

Breakout

> Board
>
>
> > Anthony,
> >
> > I will get back with you later today. I will put together all the
> > information that want.
> >
> > Bob Campbell
> > http://www.campbelldesigns.com
> > Breakout Boards
> > VisualMill 5.0 basic
> > ----- Original Message -----
> > From: "anthony_annicchiarico" <anthony_annicchiarico@y...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Saturday, December 27, 2003 6:16 AM
> > Subject: [CAD_CAM_EDM_DRO] Wiring Soundlogic/Campbelldesigns

Breakout

> Board
> >
> >
> > > I'm very bad in electrical subject !
> > >
> > > I'm trying to wire a Soundlogic/Campbelldesigns Breakout Board

Plus

> > > for MACH2. I uses Gecko 201, XYZ Home Switch , XYZ limit switch

(one

> > > per axis), a relay for spindle on/off, another relay for a dust
> > > collector and a Estop and a power supply for my geckos.
> > >
> > > 1) Is anyone here able to draw me a wiring diagram, indicating

me how

> > > to wire all my parts (particularly Estop) and what type of AWG

wire I

> > > have to use ? you can send be the schemes by Mail.
> > >
> > > 2) advice to choose my relays (part references would be

appreciate)

> > >
> > > 3) advice to choose my limit and home switches (part references

would

> > > be appreciate)
> > >
> > > 4)what is the PCB relay board mention in the board manual,

advantages

> > > and drawbacks to use it ? and how to build it ?
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,

wanliker@a...,

> > timg@k...
> > > Moderator: pentam@c... indigo_red@q... davemucha@j...
> > [Moderators]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to

reach it

> if
> > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this

to be a

> > sister site to the CCED group, as many of the same members are

there, for

> OT
> > subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY

POSTING THEM.

> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > > To visit your group on the web, go to:
> > > http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
> > >
> > > To unsubscribe from this group, send an email to:
> > > CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > >
> > > Your use of Yahoo! Groups is subject to:
> > > http://docs.yahoo.com/info/terms/
> > >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,

wanliker@a...,

> timg@k...
> > Moderator: pentam@c... indigo_red@q... davemucha@j...
> [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to

reach it if

> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this

to be a

> sister site to the CCED group, as many of the same members are

there, for OT

> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY

POSTING THEM.

> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Yahoo! Groups Links
> >
> > To visit your group on the web, go to:
> > http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
> >
> > To unsubscribe from this group, send an email to:
> > CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >
> > Your use of Yahoo! Groups is subject to:
> > http://docs.yahoo.com/info/terms/
> >
> >