Re: Gecko 320 problem

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "callcbm2000" <callcbm@d...>
wrote:

> I just wired up dc brushed servo motors to a gecko 320 when I power
> up the motors spin and won't stop or dither . They just spin Help!

Sounds like the encoders are either not hooked up or are reversed.
The Gecko is trying to reach an equalibrium point with the encoder
count and if it is backwards it will never be "happy".

Is this with or without step pulses into the Gecko?