Re: Gecko 320 problem
Posted by
dakota8833
on 2003-12-28 10:30:15 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "callcbm2000" <callcbm@d...>
wrote:
set the proper direction in software then swap the A and B on the
encoder instead. For some reason + and - is not red(hot) or
black(ground/common) on many servo's.
Frank
wrote:
> I just wired up dc brushed servo motors to a gecko 320 when I powerCommon problem ,... reverse the + and - of the servo. If you can not
> up the motors spin and won't stop or dither . They just spin Help!
set the proper direction in software then swap the A and B on the
encoder instead. For some reason + and - is not red(hot) or
black(ground/common) on many servo's.
Frank
Discussion Thread
callcbm2000
2003-12-27 11:11:18 UTC
Gecko 320 problem
caudlet
2003-12-27 11:16:39 UTC
Re: Gecko 320 problem
Mariss Freimanis
2003-12-27 12:11:20 UTC
Re: Gecko 320 problem
dakota8833
2003-12-28 10:30:15 UTC
Re: Gecko 320 problem
deanc500
2003-12-29 14:52:05 UTC
Re: Gecko 320 problem