Re: [CAD_CAM_EDM_DRO] Motor specs?

Forgot to tell. It's a NEMA 34 frame, 3.7 inches long body. Also wanted to
ask if it would be strong enough for a 5 inch 1:40 indexing head.

Zafar

----- Original Message -----
From: "Brian" <ka1bbg@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, January 06, 2004 5:08 AM
Subject: Re: [CAD_CAM_EDM_DRO] Motor specs?


> hi, 5 volts 1 amp is usually 53 oz.inch so 12 volts at 1 amp is around 100
> 120 oz.inch good for a small machine. cul brian f.
> ----- Original Message -----
> From: "Zafar Salam" <zafar@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Monday, January 05, 2004 9:46 AM
> Subject: [CAD_CAM_EDM_DRO] Motor specs?
>
>
> > Hi,
> >
> > Any clue on the motor specs for Astrosy Miniangle Stepper, type
34PM-C108,
> > 12 V/phase, 1.0 A/phase. Yep that's what the label says. It's a 6 wire
> > motor.
> >
> > Zafar
> >