timing belt / pulley source needed.
Posted by
bdrmachine
on 2004-01-08 08:58:25 UTC
I need to buy timing belts and pulleys for my Lathe conversion. I
would like a 2:1 ratio with the small pulley having a 16mm bore and
the large one being 12mm. The bore size is not so important if they
can be bored out. The biggest problem I have is price. Does anyone
know of a supplier with decent pricing? Berg is way out of line
with their price.
Thanks
Brian
would like a 2:1 ratio with the small pulley having a 16mm bore and
the large one being 12mm. The bore size is not so important if they
can be bored out. The biggest problem I have is price. Does anyone
know of a supplier with decent pricing? Berg is way out of line
with their price.
Thanks
Brian
Discussion Thread
bdrmachine
2004-01-08 08:58:25 UTC
timing belt / pulley source needed.
Jerry Kimberlin
2004-01-08 09:24:52 UTC
Re: [CAD_CAM_EDM_DRO] timing belt / pulley source needed.
William Scalione
2004-01-08 09:46:24 UTC
Re: [CAD_CAM_EDM_DRO] timing belt / pulley source needed.
Mouss_T
2004-01-09 07:26:30 UTC
Galil DMC 1842
Peter Renolds
2004-01-09 08:59:30 UTC
Re: [CAD_CAM_EDM_DRO] Galil DMC 1842
JanRwl@A...
2004-01-09 18:23:18 UTC
Re: [CAD_CAM_EDM_DRO] timing belt / pulley source needed.
geostabilizer
2004-01-14 09:18:51 UTC
Re: Galil DMC 1842