RE: [CAD_CAM_EDM_DRO] Relay question about diodes across the coil

Greg:

What's a snubber circuit look like?

Jeff


-----Original Message-----
From: Greg Jackson [mailto:greg@...]
Sent: Saturday, January 10, 2004 9:35 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] Relay question about diodes across the coil

AC relays can broadcast quite a bit of energy if you open the circuit while
the current is flowing. I have seen them take out an unattached laptop
about 8 feet away. A snubber circuit will stop this if you are switching
the coil with a contact like a switch or another coil. If you are switching
the coil with a triac then there is no chance to broadcast energy since the
current only stops flowing at a zero crossing.

Greg

-----Original Message-----
From: washcomp [mailto:jeff@...]
Sent: Saturday, January 10, 2004 8:06 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Relay question about diodes across the coil


Back when I was a kid learning about relay circuits on the job
(1960's), most of the control circuits I got involved in used low
voltage A.C. and I don't ever remember seeing a diode. I just found
out that it's good practice to put a diode across the coil of relays
to keep them from chattering due to the current stored in the coil
inductance. Question is: Only on D.C. relays or is this supposed
to be done on A.C. relays as well?

Jeff




Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/

To unsubscribe from this group, send an email to:
CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/




Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/

To unsubscribe from this group, send an email to:
CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/