Re: e-stop / limit switch help needed

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Robert Campbell" <bob@c...>
wrote:


thanks for the interest,

this machine is a boss5 bridgeport,it is being powered by a rotary
phase converter and will be controlled independent of the software
for now. its speed is variable and it will be turned on by a
switch that was originally on the machine.

> Jeff,
>
> How are you powering your spindle?
>
> Bob Campbell
> http://www.campbelldesigns.com
> Breakout Boards
> VisualMill 5.0 basic
> Stepper motors
> Plasma Torch Height, THC 300 boards
> ----- Original Message -----
> From: "ja_erickson" <ja_erickson@y...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Saturday, January 10, 2004 5:31 PM
> Subject: [CAD_CAM_EDM_DRO] e-stop / limit switch help needed
>
>
> > hey all,
> >
> > is there anybody out there that has an e-stop circuit schematic
> > that will kill the spindle, as well as disable gecko 320
> > drives simultaneously?
> > and
> > is there anybody out there that has a limit switch schematic
> > that will that will kill the spindle as well as disable gecko 320
> > drives simultaneously?
> >
> > using mach2
> >
> > any help is cool
> > thanks
> > jeff
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,

wanliker@a...,

> timg@k...
> > Moderator: pentam@c... indigo_red@q... davemucha@j...
> [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to

reach it if

> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this

to be a

> sister site to the CCED group, as many of the same members are

there, for OT

> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY

POSTING THEM.

> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Yahoo! Groups Links
> >
> > To visit your group on the web, go to:
> > http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
> >
> > To unsubscribe from this group, send an email to:
> > CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >
> > Your use of Yahoo! Groups is subject to:
> > http://docs.yahoo.com/info/terms/
> >