Re: [CAD_CAM_EDM_DRO] anilam pinouts

Thanks Ed
Just what I needed. I have now done a test on the X axis using a
step/direction driver and 90 V DC supply.With a pic program
tested the axis at up to 120 KC steps in sprints up to 20" and a 200lb
weight on the table. No problem. Touch wood .

I am now after a hand pendant which can be interfaced to the mach2
controller or via a Kboard emulator.
Must have an encoded handwheel etc. Would anybody know where to get one at
a reasonable price.

Kib.

----- Original Message -----
From: "Ed Fanta" <atex57@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, January 15, 2004 3:45 PM
Subject: Re: [CAD_CAM_EDM_DRO] anilam pinouts


>
>
> Kib Kibel wrote:
> >
> > Does anyone know the anilam linear scales encoder pinouts and type of
output etc. They are old, maybe 24 years and are terminated in a 6 pin
canon type plug.
> >
> > Kib.
> Anilam and Acurite used the same scales for a while. A sheet I have
> gives the details for Acurite.
> Looking at the plug on the cable holding the connector with the large
> key on top the pin on top is pin A, pin B,C,D,E,and F go clockwise from
> there.Pin A is ChanA,color white, Pin B isChanB,color green, Pin C is
> Vcc +5 volts,color red, Pin D is Common power and signal return,color
> black, Pin E is Shield, Pin F is Fiducial Trigger Output,color blue. All
> are TTL compatible open collector with internal pull up, 7mA max current
> sink. Good luck. Ed.
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>