Re: Hi frequency inverters and spindles
Posted by
hodarthestrange
on 2004-01-24 20:44:56 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "William Scalione"
<wscalione@n...> wrote:
had 4 of them on it back a few years. I don't have 3 phase were I am
at so I am currently running a 3 1/4 hp porter cable. I have 2 of the
25hp freq drives. each 25hp drive ran 2 routers. I would like to drive
this with a smaller freq drive. Any suggestions. Would like to get
variable speed. Being its 300 hertz and 12hp I don't know what could
drive it.
Can it be rewired to a 5hp motor?
Either that Or i'm gonna sell it. Had the used thermwood guy offer me
$500 for it last year. Guess that was a good price if that one on
e-bay went for $100.
<wscalione@n...> wrote:
> Speaking of perske spindles, there is one on ebay that ends in 2days. A big
> sucker at 12 HP, not mine, just happened to run across it.http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2589646776&category=57122
>
>
>I also have a 12hp perske sitting on the floor of my shop. My router
> Bill
had 4 of them on it back a few years. I don't have 3 phase were I am
at so I am currently running a 3 1/4 hp porter cable. I have 2 of the
25hp freq drives. each 25hp drive ran 2 routers. I would like to drive
this with a smaller freq drive. Any suggestions. Would like to get
variable speed. Being its 300 hertz and 12hp I don't know what could
drive it.
Can it be rewired to a 5hp motor?
Either that Or i'm gonna sell it. Had the used thermwood guy offer me
$500 for it last year. Guess that was a good price if that one on
e-bay went for $100.
Discussion Thread
ddgman2001
2004-01-14 09:16:33 UTC
Hi frequency inverters and spindles
Jon Elson
2004-01-14 10:30:09 UTC
Re: [CAD_CAM_EDM_DRO] Hi frequency inverters and spindles
ddgman2001
2004-01-24 12:07:38 UTC
Re: Hi frequency inverters and spindles
William Scalione
2004-01-24 12:57:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hi frequency inverters and spindles
Jon Elson
2004-01-24 13:06:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hi frequency inverters and spindles
Brian
2004-01-24 17:44:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hi frequency inverters and spindles
cnc002@a...
2004-01-24 18:25:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hi frequency inverters and spindles
tommy clay
2004-01-24 18:35:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hi frequency inverters and spindles
hodarthestrange
2004-01-24 20:44:56 UTC
Re: Hi frequency inverters and spindles