Re: Bijur oiler parts
Posted by
metlmunchr
on 2004-01-25 14:59:03 UTC
Shawn, most any place that sells heavy truck parts will stock small
diameter (approx 1/8") nylon (or some kind of plastic) tubing and
fittings. They're used for the air shift on Roadranger
transmissions, so the tubing they will have has excellent pressure,
temperature, and oil/solvent resistance properties. Not expensive,
and they will cut off whatever length you need.
Cliff
diameter (approx 1/8") nylon (or some kind of plastic) tubing and
fittings. They're used for the air shift on Roadranger
transmissions, so the tubing they will have has excellent pressure,
temperature, and oil/solvent resistance properties. Not expensive,
and they will cut off whatever length you need.
Cliff
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Shawncd" <shawncd@p...>
> > wrote:
> I also need a piece of nylon line 1/8" I think with comprssion
>fittings. Checked McMaster and MSC with no luck. I know I can come
>up with something, but if someone has any of these parts email me
>offline.
> > > shawncd@p...
> > > Thanks in advance!!!
Discussion Thread
Shawncd
2004-01-24 23:20:42 UTC
[CAD_CAM_EDM_DRO] Bijur oiler parts
ballendo
2004-01-25 08:44:01 UTC
Re: Bijur oiler parts
ballendo
2004-01-25 08:44:04 UTC
Re: Bijur oiler parts
Shawncd
2004-01-25 10:09:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bijur oiler parts
metlmunchr
2004-01-25 14:59:03 UTC
Re: Bijur oiler parts
Shawncd
2004-01-25 15:42:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bijur oiler parts
Bob McKnight
2004-01-25 17:10:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bijur oiler parts
Shawncd
2004-01-25 17:29:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bijur oiler parts
ja_erickson
2004-01-26 15:27:19 UTC
Re: Bijur oiler parts
Shawncd
2004-01-26 17:20:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bijur oiler parts
Scot
2004-01-26 20:06:04 UTC
Re: Bijur oiler parts