Re: [CAD_CAM_EDM_DRO] Re: Bijur oiler parts

Yeah, I thought the same thing Cliff but these fittings are not of the
standard brake double flare, npt pipe or other. The tubing I can get
anywhere but the pressure reducing valve along with its own built in check,
will be impossible to come by locally. The flare and nut combo are 5/16-18
standard thread. That to can not be found in town. Bellow is a link Ballendo
sent. It shows what I'm talking about.

http://www.bijur.com/products/products_meterunit.html

Thanks anyway...

----- Original Message -----
From: "metlmunchr" <metlmunchr@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, January 25, 2004 12:24 PM
Subject: [CAD_CAM_EDM_DRO] Re: Bijur oiler parts


> Shawn, most any place that sells heavy truck parts will stock small
> diameter (approx 1/8") nylon (or some kind of plastic) tubing and
> fittings. They're used for the air shift on Roadranger
> transmissions, so the tubing they will have has excellent pressure,
> temperature, and oil/solvent resistance properties. Not expensive,
> and they will cut off whatever length you need.
>
> Cliff
>
>
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Shawncd" <shawncd@p...>
> > > wrote:
> > I also need a piece of nylon line 1/8" I think with comprssion
> >fittings. Checked McMaster and MSC with no luck. I know I can come
> >up with something, but if someone has any of these parts email me
> >offline.
> > > > shawncd@p...
> > > > Thanks in advance!!!
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>