Re: [CAD_CAM_EDM_DRO] DRO question (DRO kit verses an off the shelf product)

Hi,

Accuracy wise the resolution of the USDigital scales are very good for the
price if mounted well. BUT, you are thinking of putting them on a lathe. The
Z axis will be fine with a resolution approaching 0.0005" but on the cross
slide you will only get half this resolution because you are machining off
the diameter ie 0.001" in-feed = 0.002" off the diameter. You really need a
scale of greater resolution for the cross slide.

Regards,

Terry

> Am I giving up anything accuracy wise by using the US Digital
> flexable strips if everything is installed smartly and cleanly?
>
> thanks,
>
> Mike