Re: Wire identification. hookup of Sanyo Super L servo? Help?

Thanks very much Ed Gilbert, I'll look to the Rutex documentation
now.

I am building a Gantry type machine with these. You've helped.

David



--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Ed Gilbert" <co2man@n...>
wrote:

> Hi David,
>
> Here is the encoder color code:
>
> Red +5
> Black 0 volts
> Blue Channel A
> White Channel B
>
> Outputs are open collector so they require a pull up resistor to

+5 if the

> drive does not have one. Current should be limited to 10 milliamp

maximum. 5

> volts at 680 ohms is 7.35 milliamps.
>
> Best,
>
> Ed Gilbert
>
> Gilbert Engineered Systems
> 632 Warrenton-Embro Road
> Macon, NC 27551
> 252-257-0539
>
> > -----Original Message-----
> > From: ibewgypsie [mailto:ibewgypsie@h...]
> > Sent: Saturday, February 21, 2004 12:32 PM
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: [CAD_CAM_EDM_DRO] Wire identification. hookup of Sanyo

Super L

> > servo? Help?
> >
> > Howdy..
> >
> > I have 3 Sanyo Servo super L motors, Rutex drives to run

them.

> >
> > Encoders on end, wires, Red, blue, black, white, shield
> >
> > If it was american, the red and black would be logical choices

for

> > power. Sometimes the japanese like blue, euro like white.. so?
> >
> > Going onto a gantry table if I ever get all the parts and loose

ends

> > together.
> >
> > David.
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,

wanliker@a...,

> > timg@k...
> > Moderator: pentam@c... indigo_red@q... davemucha@j...
> > [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to

reach it

> > if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this

to be a

> > sister site to the CCED group, as many of the same members are

there, for

> > OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY

POSTING THEM.

> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
>
>
> -------------------------------------
> This message has been scanned for viruses and
> dangerous content by NCOL.NET, and is believed to be clean.