CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] transformers

Posted by kib
on 2004-02-25 12:27:11 UTC
Just one source. Make sure that the secondary windings are connected in
phase. you can check by connecting one of the pair together and check if you
get a AC voltage between the unconnected pair. The wrong way will give you
twice the voltage. where is the right way should only give you a very small
voltage if anything.

kib

----- Original Message -----
From: "matthew flanigan" <hholloween@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, February 25, 2004 7:07 PM
Subject: [CAD_CAM_EDM_DRO] transformers


> got a question for you guys if im using two 110 transformers in a
parrallel do i need two 110 power sources or just one.
>
>
>
>
> Matt,
> SLASHER
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>

Discussion Thread

matthew flanigan 2004-02-25 11:58:18 UTC transformers kib 2004-02-25 12:27:11 UTC Re: [CAD_CAM_EDM_DRO] transformers Andy Wander 2004-02-25 12:38:39 UTC RE: [CAD_CAM_EDM_DRO] transformers Greg Nuspel 2004-02-25 12:44:35 UTC Re: [CAD_CAM_EDM_DRO] transformers Dave Fisher 2004-02-25 13:45:49 UTC RE: [CAD_CAM_EDM_DRO] transformers