RE: [CAD_CAM_EDM_DRO] transformers

Paralleling transformers is not recommended-if the voltage is not EXACTLY
the same on boith, they will end up "Driving each other", instead of the
load.

That said, I know people do it. Make sure they are in phase with each other,
otherwise you will have problems. So if you need 2 AC ckts(for current
requirements) make sure those circuits are on the same phase, or leg. (If
you don't know what I mean, you should probably not build your own power
supply.)

Andy Wander
Verrex Corporation

-----Original Message-----
From: matthew flanigan [mailto:hholloween@...]
Sent: Wednesday, February 25, 2004 2:08 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] transformers

got a question for you guys if im using two 110 transformers in a parrallel
do i need two 110 power sources or just one.




Matt,
SLASHER


[Non-text portions of this message have been removed]




Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links