Re: Vertical Mill to CNC Conversion
Posted by
rawen2
on 2004-03-01 11:55:53 UTC
Wayde,
I have no experience with Grizzly's tools, but have heard good things
about them on various Yahoo groups.
Did you also look at the #G9959? It costs $250 more than the #3102
but it has more X axis travel, more than twice the Y axis travel (12
3/4") and the top spindle speed is greater at 5000 RPM. It also has
19" of knee travel. Not sure how much knee travel the #3102 has.
Ralph Wenzl
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Wayde Gutman
<waydecgutman@r...> wrote:
I have no experience with Grizzly's tools, but have heard good things
about them on various Yahoo groups.
Did you also look at the #G9959? It costs $250 more than the #3102
but it has more X axis travel, more than twice the Y axis travel (12
3/4") and the top spindle speed is greater at 5000 RPM. It also has
19" of knee travel. Not sure how much knee travel the #3102 has.
Ralph Wenzl
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Wayde Gutman
<waydecgutman@r...> wrote:
> I would like to know what this group think of Grizzly Industrial'sas
> models #G1126, #G0519 and #G3102 [catalog 2004, pages 436 and 437]
> the base of a CNC conversion project. My preference would be #G3102as
> it is a knee mill and the knee would have the Z axis conversion.
>
> -Wayde Gutman
Discussion Thread
Wayde Gutman
2004-02-29 14:12:04 UTC
Vertical Mill to CNC Conversion
rawen2
2004-03-01 11:55:53 UTC
Re: Vertical Mill to CNC Conversion
Kim Lux
2004-03-01 13:10:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vertical Mill to CNC Conversion
industrialhobbies
2004-03-01 22:42:06 UTC
Re: Vertical Mill to CNC Conversion