CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Digital Power Capacitor -

on 2004-03-01 12:00:52 UTC
If the voltages and farad are within the specs or your appliction, these
should be fine. The main reason they are labeled as digital is their
ability to react extremely fast in dealing with the high contrast signal
generated by digital audio equipment.

Matt

-----Original Message-----
From: Les Newell [mailto:les@...]
Sent: Monday, March 01, 2004 11:55 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Digital Power Capacitor -


Most of these car audio caps have a maximum voltage of about 15V. This
is far too low for Geckos.

Les

plastiguy wrote:

> Group -
> Does anyone know if the car audio style digital power capacitors (the
> digital refers to some sort of digital readout indicating power
> consumption) are suitable for use in a power supply application?
> This'll be to feed Gekoes to DC servos. The voltages and farad
> ratings I've seen for some relatively inexpensive ones on e-bay seem
> to fit well. Am I missing something?
> Tx -
> Scott
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........

> bill List Mom List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner


Yahoo! Groups Links

Discussion Thread

plastiguy 2004-03-01 09:24:28 UTC Digital Power Capacitor - Les Newell 2004-03-01 10:05:06 UTC Re: [CAD_CAM_EDM_DRO] Digital Power Capacitor - Armistead, Matthew D - Norman, OK 2004-03-01 12:00:52 UTC RE: [CAD_CAM_EDM_DRO] Digital Power Capacitor - Jon Elson 2004-03-01 22:08:52 UTC Re: [CAD_CAM_EDM_DRO] Digital Power Capacitor -