RE: [CAD_CAM_EDM_DRO] Newbie needs servo help

Hi Robin,

If you have 4 wires to the motor and 2 are for a tach then I assume you have
brushed servo's, two larger leads possibly red and black. If the encoder has
7 leads they may be differential outputs and will cause you grief if not
wired properly. Send me pictures off list and I will try to help you out.


Best,

Ed Gilbert

Gilbert Engineered Systems
632 Warrenton-Embro Road
Macon, NC 27551
252-257-0539

> -----Original Message-----
> From: INDECO [mailto:indeco@...]
> Sent: Thursday, March 04, 2004 7:25 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] Newbie needs servo help
>
> Sorry Jon...I mean they have 7 wires coming off the encoder not 6.
> There are 4 that go to the motor...I assum the 2 small 22gage wire that go
> in the motor are for tach.
>
> Robin
>
>
>
> ----- Original Message -----
> From: "INDECO" <indeco@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Thursday, March 04, 2004 7:20 AM
> Subject: Re: [CAD_CAM_EDM_DRO] Newbie needs servo help
>
>
> > Jon,
> >
> > I am running gecko drives from www.gecko.com
> > The motors just want to spin when I energize them.
> > There are 6 leads coming off of them. they have tachs as well.
> > I can send pictures.
> >
> >
> >
> > Robin
> >
> >
> > ----- Original Message -----
> > From: "Jon Elson" <elson@...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Thursday, March 04, 2004 1:08 AM
> > Subject: Re: [CAD_CAM_EDM_DRO] Newbie needs servo help
> >
> >
> > >
> > >
> > > INDECO wrote:
> > >
> > > >Hello,
> > > >
> > > > I have a 5 wire stepper motor that I need help with wiring.
> > > >I also have 2 Aerotec 1000 series servo I need help with.
> > > >I have pictures of the servo I can send someone.
> > > >
> > > >
> > > You just have the servo motors, no servo driver or servo amp?
> > > Are these brushless motors? You could be in trouble with this,
> > > as low-cost brushless drives are rare. The lowest-cost unit I know
> > > of is the Rutex R992H.
> > >
> > > Jon
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> > timg@...
> > > Moderator: pentam@... indigo_red@... davemucha@...
> > [Moderators]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if
> > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this to be
> a
> > sister site to the CCED group, as many of the same members are there,
> for
> OT
> > subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> > Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>

-------------------------------------
This message has been scanned for viruses and
dangerous content by NCOL.NET, and is believed to be clean.