Re: Yaskawa Servo Pack/Motor compatibility
Posted by
bitnick78
on 2004-03-09 01:48:04 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "vrsculptor"
<vrsculptor@h...> wrote:
signal from the encoder is simply passed straight through from input
to output with no change."
These motor have a special index (encoder C phase) signal, that also
has to be processed for this to work.
Arvid
<vrsculptor@h...> wrote:
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "bitnick78"together
> > I have bought an SGM-02A3 Servo motor and a SGDE-02AS Servo Pack
> > (both 200W, both used). Now it turns out these don't work
> > (the servo pack being a budget version which expects 1024 P/Rfrom
> > the motors, while the motor encoder is 2048 P/R). (The # orpulses
> > has to be correct between motor and servo pack for thecommutation
> toget
> > work on these 3-ph motors.)
>
> Arvid,
> US Digital sell a programable encoder count divider
> http://www.usdigital.com/products/edivide/ for $40. Cheap way to
> everything to play together.Thanks for the tip, but it won't work. From the webpage: "The index
>
> Roger
signal from the encoder is simply passed straight through from input
to output with no change."
These motor have a special index (encoder C phase) signal, that also
has to be processed for this to work.
Arvid
Discussion Thread
bitnick78
2004-03-08 12:23:36 UTC
Yaskawa Servo Pack/Motor compatibility
Hartono Setiono
2004-03-08 14:54:13 UTC
Re: [CAD_CAM_EDM_DRO] Yaskawa Servo Pack/Motor compatibility
vrsculptor
2004-03-08 16:03:46 UTC
Re: Yaskawa Servo Pack/Motor compatibility
bitnick78
2004-03-09 01:48:04 UTC
Re: Yaskawa Servo Pack/Motor compatibility
Erie Patsellis
2004-03-09 05:37:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Yaskawa Servo Pack/Motor compatibility
vrsculptor
2004-03-09 05:57:13 UTC
Re: Yaskawa Servo Pack/Motor compatibility
bitnick78
2004-03-09 10:46:41 UTC
Re: Yaskawa Servo Pack/Motor compatibility